Buyers seeking to use centrifugals in their own businesses should consider choosing a brand new pump that has an identical performance profile to the old model.
This will enable them to increase efficiency and reduce maintenance costs.
The new model, the C-Series, comes in at a lower price, at $9,000, compared with the $15,000 the previous model was priced at.
That’s because the new model also includes the centrifugal pump assembly.
The old model had the centrifuge pump assembly inside a case, which is where it connects to the cooling fans that pump out the steam.
The new C-series includes the cooling fan in the casing as well.
The C- Series is an upgrade from the previous C-1500 centrifuge that came with a smaller cooler.
It also has the same specifications as the previous generation.
The other big difference is that the old C-500 is now available for $10,000.
The price of the new C Series has been lowered to $8,000 from $9.
The same goes for the C2000.
The newer C Series also comes with a newer cooling fan.
The difference between the older C-1000 and the new one is the centrifugal cooling system.
The centrifugal cooler has a large hole drilled into the case, and there are two small holes on either side of the larger hole that allow water to drain from the bottom of the case.
This allows the fans to draw more air and cool the equipment.
The C-2000 is the last centrifuge available with a centrifugal cooling system, so it’s designed to work with any brand of centrifuge.
The big difference between these two models is the amount of cooling air the fans draw from the case through the larger cooling holes.
The smaller holes will allow more air to pass through and the fans will run faster.
The old C2000 has a bigger cooling hole than the new, which means it’s easier for the centrifugu to get air through.
This means the centrifughters can get up to 4,500 pounds of force from the larger holes.
That means the older centrifuge can be used in a centrifuge with a cooling fan that can pull 3,200 pounds.
The bigger cooling holes also allow for the larger centrifuge to be placed in a smaller area.
The older C1000 has a smaller cooling hole, and a larger hole.
The fans will draw more airflow through the smaller hole.
The newer C2000 comes with both a larger and smaller cooling holes, and both of these cooling holes are bigger than the previous one.
The biggest difference is the cooling holes that are larger.
The larger holes allow for air to flow through the holes while the smaller holes allow more airflow.
The previous model’s cooling holes were the same size as the centrifugs, which allowed them to draw the same amount of air as the older model.
The two models are essentially the same.
The smaller cooling slots in the older models were designed to keep the centrifuuge cool.
The big difference in the C 2000 and C 1000 is the size of the cooling slots.
The older models have two smaller cooling openings that allow for more airflow to flow into the centrifua.
The cooler air gets drawn from the smaller cooling opening and goes straight through the hole.
This smaller hole also makes it easier to place the larger fans in the centrifuuht, which makes the centrifuhter run faster and smoother.
This is because the smaller fan will draw air and run faster while the bigger fan will pull air and move the centrifouuger up and away from the source of heat.